In fact, spinning products have been around us, but everyone has not noticed its existence. One might wonder what spinning technology is? In fact, spinning technology of spinning machine manufacturers is the technical means of manufacturing things.
The principle of spinning technology is to fix the material plate on the mould of the spinning machine, clamp it by the clamping mechanism, start the spinning machine, rotate the blank and the mould together, feed and apply the pressure by the spinning wheel, and apply the pressure to make the plate close to the mould and deform it point by point, so that the local deformation will gradually expand to the whole surface of the blank and close to the mould Core.
In the spinning process, slowly adjust the lifting device so that the driving shaft drives the spinning wheel slowly downwards when rotating. In order to make the rotating front R-arc meet the requirements of the drawing, when rotating to a certain extent, the arc inspection template of the front panel can be used for proofreading until the requirements are met, which can form effective and high-quality design of various fan parts.
In fact, it is easy to understand that the spinning machine manufacturers fix the materials on the spinning machine, then rotate and apply pressure, and finally make the mold shape. In fact, metal spinning is mainly used to form open shaped workpiece, that is, the diameter ratio of forming end. The diameter of the other parts must be large so that the spun part can be removed from the molds. If it is necessary to closed shape of the workpiece, it is necessary to spin the workpiece into several parts, and then weld the parts together to form the required shape.
Your location：
